The DS600 vacuum blast cabinets, are reserved for very small parts and is a space-saving machine.

Its vacuum system projects the abrasive thanks to a venturi effect created inside the tungsten carbide nozzle .

The cyclone at the back of the blast cabinet is used to sort out the dust to be evacuated and the abrasive grains that can be reused.

(Price: contact us)

The DS vacuum bag cabins use the same principle as all vacuum machines: a venturi system inside the tungsten carbide nozzle is used to project the abrasive onto the sandblasted workpiece.

The healthy abrasive is then separated from the dust in the cyclone at the back of the blast cabinet. The dust is collected in the collection bag and the abrasive is redirected to the nozzle.

(Price: contact us)

DS type bag cabins are professional sandblasting machines operating with a vacuum system. That is, the abrasive is projected via a venturi effect created inside the tungsten carbide nozzle .

The cyclone at the rear of the PRO series machines allows the abrasive to be sorted. Dust is discharged into the dust bag at the back of the sandblaster while larger grains of abrasive are reused.

(Price: contact us)

The DS1500 sandblasting machines are the largest machines in the PRO range.

The operating mode of these cabins is the same as for the other DS type machines: the abrasive is projected thanks to the venturi system of the tungsten carbide nozzle .

It is then separated from the dust; The dust is discharged into the recovery system integrated into the baghouse, and the pure abrasive is recycled and reinjected into the nozzle.

(Price: contact us)

The PS 700 blast cabinet combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone, these sandblasting machines can sort the abrasive in order to separate dust and healthy abrasive grains. These are then reprojected.

(Price: contact us)

The PS 1000 combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone at the rear of the machine, the PRO range allows the abrasive to be sorted. Dust is discharged into the dust bag at the back of the sandblaster while larger grains of abrasive are reused.

(Price: contact us)

The PS1500 works with an abrasive tank that is pressurized for blasting with 3 to 5 times higher yields compared to the vacuum system.

The recycling cyclone allows the separation of dust from the abrasive. The waste is then discharged into the dust collection bags and the recycled abrasive is resprayed.

(Price: contact us)

The DF Expert Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

The Expert DF Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

Designed and manufactured in France, the DF 1250 large-format industrial sandblasting cabinet is a high-performance sandblasting machine based on a vacuum/injector projection system (Venturi effect) that guarantees power, precision, and consistency.

Equipped with the innovative and compact ARENA BLAST triple module system, it ensures efficient suction, optimal abrasive recycling, and effective dust collection for a clean and safe working environment.

Robust, ergonomic, and easy to maintain, the DF 1250 is a long-term investment for companies looking to improve the quality of their surface treatment operations, increase productivity, and guarantee consistent and reliable sandblasting results.

The Expert DF Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

The PF type sleeve cabins are definitely the most powerful cabins in our range; They combine the quality of the materials and the pressure system for great sandblasting power.

Recommended for tough processing or for greater productivity, they can be equipped with the double pot option for continuous blasting without the need to stop to fill the abrasive tank.

(Price: contact us)

The PF1250 professional blasting cabinets are "square" cabinets. Indeed, this model of machine is as wide as it is deep.

They allow the treatment of large parts in the sandblasting chamber and can strip any type of paint thanks to the overpressure spraying system.

The abrasive tank is pressurized and the abrasive is sent to the nozzle with the pressure build-up. This system allows for 3 times more efficiency than vacuum machines.

(Price: contact us)

The PF1500 blast cabinets make it possible to blast and strip larger parts.

The high-performance ventilation integrated into the cab and the two cyclones at the rear of the machine allow for a very good view of the blast chamber. They are also used to separate the healthy abrasive from the worn abrasive and dust to preserve the elements of the blasting machine.

The abrasive overpressure spraying system gets rid of the most stubborn paints.

(Price: contact us)

The 1515E bag cabinets are the largest blasting cabinets we offer in standard sizes. With their internal dimensions of 1.5x1.5x1 m, they make it possible to process large one-piece parts while maintaining the characteristics of our baghouses.

On this machine, the abrasive is projected thanks to its pressurized tank. The abrasive is sprayed and then recycled.

This machine from our EXPERT range, designed for intensive use, benefits from 2 cyclones at the rear of the cab, efficient ventilation, and a powerful engine.

Machine equipped with a reinforced loading trolley with turning table (CHAR3) and additionnal dust collector  (DPE 750)

(Price: contact us)

The PF700 professional bag blasting cabinets combine performance with a small footprint.

They are recommended for parts that do not exceed 50cm and/or need to be difficult to pickle.

Pressure booths work with a simple principle; The abrasive tank is pressurized and the abrasive is projected through the boron carbide nozzle thanks to this principle.

At the back of the machine, two cyclones are responsible for sorting the abrasive and dust.

(Price: contact us)

Automatic sandblasting/microblasting cabinet with rotating basket dedicated to de-powdering and surface treatment for parts printed in 3D using SLS and MJF technologies.

This is the machine for post processing in additive manufacturing.

Nozzle holder for tungsten carbide diameter nozzle with abrasive feed hose for vacuum/suction system.

(IMPORTANT Supplied without nozzle!)

CODES: PP4/4 - PP 4 - PP 4 T3.30 - PN 4 - PN 4 T3.30 - CN 4 - CN 4 T3.30 - CN 4 A 

Tungsten carbide microblasting nozzle Ø1.7 mm with venturi

Nozzle for vacuum blast cabinets and free-blast guns with vacuum blasting system. 

CODES: PP2/4 - PP2 - CMI 2A - CMI 2

Boron carbide nozzle in its nozzle holder for pressure abrasive blasting system

CODES: BU 4 - BU 5 - BU 6 - BU 8 

Nozzle holder for free jet vacuum blast gun nozzles 

CODES: P15C 3 - P3C 4 - P6C 4

Tungsten carbide nozzle in its nozzle holder for pressure abrasive blasting system

CODES: BT 2 - BT 3 - BT 4 - BT 4/10 - BT 5 - BT 6 - BT 8

Nozzle holder with boron carbide nozzle for vacuum/suction sandblasting system.

CODES: PP 5E / PN 5E / CN 5E

The little sister of the more compact and accessible 3DX-PERT , the 3D-PRO bead blasting and dusting booth will be perfect for small series and prototypes.

The 3D PRO has been designed to process 3D printed parts by Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is reduced for a homogeneous surface finish. The removable turntable basket is designed for optimal part mixing and allows for automatic sanding and complete blowing while preserving their geometry.

The DC 1500 Sandblasting cabinet is suitable for larger workpieces.

The operating principle and handling remain the same as in the smaller cabinets: the sprayed abrasive is sucked up, sorted and then recycled.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The DC 600 sandblasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The DC 1000 sandblasting booth has a very simple operation.

The sprayed abrasive is vacuumed, sorted and then recycled. The waste is discharged and the pure abrasive is recycled to be resprayed by the machine's tungsten carbide nozzle.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The DC 700 handle blasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)