Rechercher
3D PRO - SLS MJF Additive Post Manufacturing Processing Sandblasting Machine
  • 3D PRO - SLS MJF Additive Post Manufacturing Processing Sandblasting Machine
  • 3D PRO - SLS MJF Additive Post Manufacturing Processing Sandblasting Machine

3D-PRO / Post-print processing additive manufacturing

The little sister of the more compact and accessible 3DX-PERT , the 3D-PRO bead blasting and dusting booth will be perfect for small series and prototypes.

The 3D PRO has been designed to process 3D printed parts by Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are...

Ajouter au comparateur
  • Ultra-compact cab fully integrated: 800 mm Width / 1100 mm depth

  • Ergonomic dual-zone workspace allowing, without additional manual operation, to sand and/or blow parts automatically or manually.

  • Booth equipped with 1 tungsten carbide sandblasting nozzle 
  • Cab equipped with 2 blowing nozzles :
    • 1 blow nozzle at the back of the basket
    • 1 auto/manual blowing nozzle with ionized air

  • Compact and high-performance integrated dual-module ventilation :
    • -Cyclone abrasive recycling: Dust removal and abrasive recycling
    • -Filter cartridge: Filtration of fine dust at 5 μm with an automatic pneumatic cleaning system

Systeme de filtration et aspiration cabines de sablage ARENA

  • Removable motorized turntable:
    • -Useful volume 13 L
    • -Ø400 mm
    • -Curb weight 15 kg
    • -PU coating

  • Multiple settings :
    • -PLC and HMI
    • -Adjustment of nozzle positions with ball joints on a stem
    • • Adjustment of the richness of the air/abrasive mixture
    • -Adjustment of the airflow speed at the inlet of the cyclone for more accurate dust/abrasive sorting
    • -Machine height adjustment

  • Intuitive replacement of wear parts (gloves, windows, filters, nozzles, etc.)
3D-PRO

Data sheet

Cab width
700 mm
Cabin interior dimensions (mm)
700 W x 650 D x 625 H
Maximum load
60 kg
Frequency of use
Supported
Abrasive Processing
With recycling system
Abrasive Spraying
Depression
Cabin type
Folded sheet metal cab
Nozzle material
Tungsten carbide (~300h of use)
Yield / Blasting Speed
100% and autonomous
Air/Abrasive Mix Adjustment
Manual on cyclone
Ventilation rate
Standard flow rate
Suction turbine power
800 W (140 m3/h)
Number of ventilation modules
2
Cyclone dust and abrasive separation modules
Yes
Cyclone Dust Separation Module
No
Filter cleaning
Sequential Pneumatics
Blower
3 blow guns: automatic, manual and ionized air
Sleeves and gloves
PVC Standard
Anti-abrasion rubber curtains
No
Retention sieves for large impurities
Inclusive
Noise level (excluding sandblasting)
72 dB
Place of manufacture
100% in our workshop in the North of France

Specific References