Angular abrasives

A tough, angular, mineral blasting abrasive ideally suited to stripping metal parts. 

This very hard aluminum oxide can be blasted many times, and is widely recommended for use in bag blast cabinets.

White corundum is a high-purity, extremely hard aluminum oxide used as an angular abrasive. It is free of impurities and is suitable for applications where iron oxide is not present, as it is non-ferrous.

GARNET® sandblasting abrasive, also used in water jet cutting

Abrasive for free-blast sandblasting and stripping with mobile sandblasters 

Sandblasting abrasive for free-blast or airblast applications, ideal for cleaning and stripping metal and stone/concrete, removing scale, rust, old paint coats and various dry impurities.

Abrasive for free-blast blasting and soft stripping with mobile sandblasters or airbrushes.

Ideal for replacing SCOREX® SC250 (fine grid).

High-quality martensitic angular steel shot for shot blasting and sand blasting.

Stainless steel shot is obtained through melting, crushing, and sieving of Cr stainless steel. The high chromium content provides excellent resistance to corrosion and use. It is an abrasive that offers great durability and recyclability due to its high resistance. Recommended for surface cleaning, removal of paints and coatings, and creating surface roughness for treatments that must be free of ferrous contamination. Ideal for the treatment of stainless steel, galvanized steel, and aluminum.

Angular abrasive made from recycled soda-lime-silica glass, which is ground and sieved to produce particles with angular edges. The particles have sharp edges, making them effective for polishing and cleaning.

Rugos 50/80 sandblast sand, 25kg bag.

Product unavailable, see article SC06 for equivalent abrasive.

"Archifine" sandblasting sand N°6, the 25 kg bag
Out of stock: see equivalent product Scorex SC06

Archifine Sandblasting Sand N°4, the 25kg bag

Product unavailable; See the SCOREX SC250 article for equivalent abrasive.