3DX-PERT - 3D Printing Post Processing
  • 3DX-PERT - 3D Printing Post Processing
  • 3DX-PERT - 3D Printing Post Processing
  • 3DX-PERT - 3D Printing Post Processing
  • 3DX-PERT - 3D Printing Post Processing
  • 3DX-PERT - 3D Printing Post Processing

3DX-PERT / Post-print processing additive manufacturing

Arecognized specialist in the sandblasting bag booth for more than 40 years, ARENA has brought together the best of its technologies and the features of its machines to meet the growing need for post-3D printing processing in a single booth !

The 3DX-PERT has been designed to process 3D printed parts using Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is reduced for...

  • Ultra Compact Cab: 1050 Width / 1500 Depth

  • Ergonomic dual-zone workspace allowing, without additional manual operation, to sand and/or blow parts automatically or manually.

  • Cab equipped with 3 sandblasting nozzles:
    • -2 automatic boron carbide blasting nozzles
    • -1 manual boron carbide blasting nozzle (foot pedal control)

  • Cab equipped with 4 blowing nozzles :
    • -3 automatic blowing nozzles (including an ionized air nozzle)
    • -1 ionized air manual blowing nozzle (gun control)

  • Three-module, compact, high-performance integrated ventilation :
    • -Cyclone abrasive recycling: Dust removal and abrasive recycling
    • - Cyclone dust separation: Recovery of coarse dust
    • -Filter cartridge: Filtration of fine dust at 5 μm with an automatic pneumatic cleaning system

Systeme de filtration et aspiration cabines de sablage ARENA

  • Removable motorized turntable:
    • -20 L usable volume
    • -Curb weight 15 kg
    • -PU coating

Panier Tournant Cabine de Sablage ARENA

  • Multiple settings :
    • -PLC and HMI
    • -Adjustment of nozzle positions with ball joints on a stem
    • • Adjustment of the richness of the air/abrasive mixture
    • -Adjustment of the airflow speed at the inlet of the cyclone for more accurate dust/abrasive sorting
    • -Machine height adjustment (120mm max)

  • Intuitive replacement of wear parts (gloves, windows, filters, nozzles, etc.)
  • Machine on wheels for easy movement
  • Reinforced cab with roll bars

Sablage de pièces imprimées en 3D SLS MJF

Also discover our other sandblasting machines

3DPRO

PRO RANGE

ECO RANGE

Since 1979 all our cabins have been designed and manufactured in our workshop in the north of France.

FABRICATION%20FRANCAISE-2024.png

For more information: contact us

3DX-PERT

Data sheet

Cab width
1000 mm
Cabin interior dimensions (mm)
1000 W x 900 D x 765 H
Maximum load
500 kg
Frequency of use
Intensive
Abrasive Processing
With recycling system
Abrasive Spraying
Depression
Cabin type
Cab made of reinforced sheet metal with hoops and lifting rings
Nozzle material
Boron carbide (~750h of use)
Yield / Blasting Speed
100% and autonomous
Air/Abrasive Mix Adjustment
Manual on cyclone
Ventilation rate
Broadband
Suction turbine power
1500 W (210 m3/h)
Number of ventilation modules
3
Cyclone dust and abrasive separation modules
Yes
Cyclone Dust Separation Module
Yes
Filter cleaning
Sequential pneumatic pressure adjustment
Blower
4 blow guns: automatic, manual and ionized air
Sleeves and gloves
High-strength latex
Anti-abrasion rubber curtains
No
Retention sieves for large impurities
Inclusive
Electrical power
1700 W
Noise level (excluding sandblasting)
74 dB
Curb weight
460 kg
Place of manufacture
100% in our workshop in the North of France

Specific References