Aperçu rapide
Additional dust collector - DPE750
The additional 900 m3/h dust collector increases the air intake into the cab to optimum levels. It's an option that provides greater suction with a larger volume of air, to handle sanding and/or blowing activities that generate a lot of dust.
Description of the additional dust collector
The additional dust collector is optional for sandblasting cabinets and is fitted as standard on dust collector machines. It increases the volume of air drawn into the booth, improving visibility, dust extraction and the quality of sandblasting or air blowing works.
The DPE 750 additional dust collector incorporates 4 filter cartridges and 4 automatic unclogging modules, each consisting of a discharge bottle and an unclogging valve. These assemblies are controlled by a pneumatic distributor, which is itself activated remotely using the machine's foot pedal.
When the pedal is depressed, 2 cartridges are unclogged; when the pedal is released, the other 2 cartridges are unclogged.
The dust is collected directly in a disposable plastic bag.
It is designed and manufactured entirely in-house by ARENA BLAST in our factory in Northern France.
DPE 750 technical specifications
- Intake air flow 900 m3/h
- 4 antistatic 1.2 µm polyester filter cartridges (500 height / Ø200 outside / Ø120 inside)
- Machine weight: 150 kg
- Power supply: 230 V / 50 Hz
- Electrical power: 750 W
- Compressed air supply: Min. 4 bar / Max. 8 bar
- Automatic filter cleaning by pneumatic shock with discharge bottles
- Suction from the top of the cab with cycloning (to limit abrasive suction) and Ø 120 mm corrugated hose
Overall dimensions of the DPE 750
Compatibility of the option with standard sandblasting and dust extraction cabinets
Small additional dust collector - DPE 400
For more information on our other, smaller dust collector with a less powerful suction volume, please refer to the product sheet (link on the right).
It works in the same way: the small additional dust collector is connected to the sandblasting cabinet from above via a vortex to avoid sucking up the heavier abrasive. The connection to a dust collector is made at the bottom of the hopper via a corrugated duct. The centrifugal fan creates a negative pressure in the booth, which sucks in the volume of air containing the dust to be removed. The dust is filtered to 1.2µm by 2 filter cartridges with an automatic cleaning system.
This is a highly effective system in situations where a lot of dust is generated, and for improving visibility inside the cab.
DPE750
Specific References
Other options and accessories available
As a machine designer and manufacturer, we can adapt each production to your needs. The list of options and accessories presented on our website is indicative only.
Don't hesitate to contact us with your project to start a study with our engineer for a tailor-made design.
All our machines, options and accessories are designed and manufactured in our factory in Northern France.
The additional 900 m3/h dust collector increases the air intake into the cab to optimum levels. It's an option that provides greater suction with a larger volume of air, to handle sanding and/or blowing activities that generate a lot of dust.