DS 1500
The DS1500 sandblasting machines are the largest machines in the PRO range.
The operating mode of these cabins is the same as for the other DS type machines: the abrasive is projected thanks to the venturi system of the tungsten carbide nozzle .
It is then separated from the dust; The dust is discharged into the recovery system integrated into the baghouse, and the pure abrasive is recycled and reinjected into the nozzle.
(Price: contact us)
For more details on the PRO range, follow this link
Internal dimensions (mm) Width x Depth x Height: 1500 x 900 x 700
Available sizes in this range (Width in mm): 600, 700, 1000
Applications: sandblasting, bead blasting, airbrushing, pickling, deburring, surface treatment, etc.
DS 1500
Data sheet
- Cab Range
- PRO (DS / PS)
- Cab width
- 1500 mm
- Cabin interior dimensions (mm)
- 1500 W x 900 D x 765 H
- Max size of workpieces that can be handled (mm)
- 1050 W x 695 D x 615 H
- Maximum load
- 250 kg
- Frequency of use
- Supported
- Abrasive Processing
- With recycling system
- Abrasive Spraying
- Depression
- Cabin type
- Folded sheet metal cab
- Nozzle material
- Tungsten carbide (~300h of use)
- Yield / Blasting Speed
- 100%
- Air/Abrasive Mix Adjustment
- Manual on cyclone
- Ventilation rate
- Standard flow rate
- Suction turbine power
- 800 W (140 m3/h)
- Number of ventilation modules
- 2
- Cyclone dust and abrasive separation modules
- Yes
- Cyclone Dust Separation Module
- No
- Filter cleaning
- Sequential Pneumatics
- Blower
- Manual
- Retention sieves for large impurities
- Inclusive
Specific References
You might also like
The DS1500 sandblasting machines are the largest machines in the PRO range.
The operating mode of these cabins is the same as for the other DS type machines: the abrasive is projected thanks to the venturi system of the tungsten carbide nozzle .
It is then separated from the dust; The dust is discharged into the recovery system integrated into the baghouse, and the pure abrasive is recycled and reinjected into the nozzle.
(Price: contact us)