PF 700
The PF700 professional bag blasting cabinets combine performance with a small footprint.
They are recommended for parts that do not exceed 50cm and/or need to be difficult to pickle.
Pressure booths work with a simple principle; The abrasive tank is pressurized and the abrasive is projected through the boron carbide nozzle thanks to this principle.
At the back of the machine, two cyclones are responsible for sorting the abrasive and dust.
(Price: contact us)
For more details on the EXPERT range, follow this link
Internal dimensions (mm) Width x Depth x Height: 700 x 650 x 540
Available sizes in this range (Width in mm): 1000, 1500, 1250, 1515
Applications: sandblasting, bead blasting, airbrushing, pickling, deburring, surface treatment, etc.
PF 700
Data sheet
- Cab Range
- EXPERT (DF / PF)
- Cab width
- 700 mm
- Cabin interior dimensions (mm)
- 700 W x 650 D x 625 H
- Max size of workpieces that can be handled (mm)
- 495 W x 435 D x 475 H
- Maximum load
- 60 kg
- Frequency of use
- Intensive
- Abrasive Processing
- With recycling system
- Abrasive Spraying
- Overpressure
- Cabin type
- Cab made of reinforced sheet metal with hoops and lifting rings
- Nozzle material
- Boron carbide (~750h of use)
- Yield / Blasting Speed
- 300-500%
- Air/Abrasive Mix Adjustment
- Per dosing washer
- Ventilation rate
- Broadband
- Suction turbine power
- 1500 W (210 m3/h)
- Number of ventilation modules
- 3
- Cyclone dust and abrasive separation modules
- Yes
- Cyclone Dust Separation Module
- Yes
- Filter cleaning
- Sequential pneumatic pressure adjustment
- Blower
- Foot control
- Sleeves and gloves
- High-strength latex
- Anti-abrasion rubber curtains
- Inclusive
- Retention sieves for large impurities
- Inclusive
- Electrical power
- 1000 W
- Noise level (excluding sandblasting)
- 74 dB
- Curb weight
- 240 kg
- Place of manufacture
- 100% in our workshop in the North of France
Specific References
You might also like
The PF700 professional bag blasting cabinets combine performance with a small footprint.
They are recommended for parts that do not exceed 50cm and/or need to be difficult to pickle.
Pressure booths work with a simple principle; The abrasive tank is pressurized and the abrasive is projected through the boron carbide nozzle thanks to this principle.
At the back of the machine, two cyclones are responsible for sorting the abrasive and dust.
(Price: contact us)