Our products

Under-door abrasive recovery gutter kit. The gutter is used to collect abrasive scraps when opening the door of our baghouses.

This helps to keep a workshop/work environment clean and dust-free on the floor.

Benefit from a sliding scale rate for all orders over 100 kg*

➔ Contact us via the contact form

Available in different grain sizes and packaging, price excluding VAT

Manual turntable diameter 500 mm.

This removable tray is compatible with all our blast or blow molding bag booths.

It is used to facilitate the handling of heavy and/or bulky parts in the closed cab.

Mobile overpressure sandblasting machine allowing high-intensity sandblasting operations to be carried out. The 8 L pressure pot allows surface treatments 3 to 5 times faster than with a basic vacuum/suction system.

Design and manufacture 100% in our workshop in the North of France.  

(Price: contact us)

The DC 700 handle blasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

>>> Additional time

Recognized specialist in the sandblasting cabinets for more than 40 years, ARENA has brought together the best of its technologies and the features of its machines to meet the growing need for post-3D printing processing in a single booth !

The 3DX-PERT has been designed to process 3D printed parts using Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is reduced for a homogeneous surface finish. The removable turntable basket is designed for optimal part mixing and allows for automatic sanding and complete blowing while preserving their geometry.

The DS600 vacuum blast cabinets, are reserved for very small parts and is a space-saving machine.

Its vacuum system projects the abrasive thanks to a venturi effect created inside the tungsten carbide nozzle .

The cyclone at the back of the blast cabinet is used to sort out the dust to be evacuated and the abrasive grains that can be reused.

(Price: contact us)

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

Rubber curtain for cabin interior - Dimensions 1500 x 700 - RIDO

It is used to protect the bottom of the handle cabin from abrasive splashes that could damage it.

This option is generally recommended for bag cabins with an overpressure projection system.

The DF Expert Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

The high-performance ventilation of this cabin allows all blown particles to be sucked in. The larger dust is collected directly in the collection bag at the back of the machine, while the finer dust is stopped by the filter cartridge.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

The SF 1000 HD booths are high-flow blow molding machines including a booth and a dust collector

This results in an additional dust collector connected to the machine. This dust collector has a very high suction power and a centrifugal fan

. Regarding filtration, the 4 filter cartridges of the dust collector are responsible for sorting the dust and preserving the components of the machine.

The sequential automatic cleaning of the filter cartridges ensures continuous efficiency and performance over time.

(Price: contact us)

Wire Window Protection Cloth 43 x 33 cm

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø5 tungsten carbide sandblasting nozzle 

The P200C mobile sandblaster, or airbrush, is equipped with a tank carriage. The abrasive, stored in the carriage, is sucked in from the bottom of the carriage and is projected via the gun's tungsten carbide nozzle.

Like the P200 gun, the 5mm nozzle requires a 2.5 horsepower compressor for optimal operation.

The DS vacuum bag cabins use the same principle as all vacuum machines: a venturi system inside the tungsten carbide nozzle is used to project the abrasive onto the sandblasted workpiece.

The healthy abrasive is then separated from the dust in the cyclone at the back of the blast cabinet. The dust is collected in the collection bag and the abrasive is redirected to the nozzle.

(Price: contact us)

Bottle of brown corundum grade 220

CODE : BOC 1

The NS8T E mobile sandblaster is a high-pressure air blaster designed for high-intensity sandblasting operations. The 8L pressurized tank allows surface treatments to be completed 3 to 5 times faster than with a basic vacuum/suction system. Indeed, the abrasive is projected with much more speed and efficiency.

100% designed and manufactured in our workshop in the North of France.

(Contact us to receive a quotation)

Benefit from a sliding scale rate
for all orders over 100 kg*

➔ Contact us via the contact form

Available in different packaging, price excl. VAT per bag:

Including 1500 cab and DPE750 high-flow dust collector

Internal dimensions (mm) Width x Depth x Height: 1000 x 980 x 680

Curb weight: 350 kg

Maximum load: 250 kg

Ventilation rate: 15m³/minute

Filtration: 4 x 500 mm filter cartridges

(Price: contact us)

Our SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

>> Shortage in our stock for the reference ABP 30/40 M 0.425 - 0.600 mm (additional delay)<<

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

The loading trolley makes it easier to enter and exit the parts to be sanded. It also allows loading by overhead crane while keeping the cabin optimally sealed.

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

The DC 1000 sandblasting booth has a very simple operation.

The sprayed abrasive is vacuumed, sorted and then recycled. The waste is discharged and the pure abrasive is recycled to be resprayed by the machine's tungsten carbide nozzle.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø6 tungsten carbide sandblasting nozzle 

The P450 C mobile sandblaster has a mobile trolley that serves as an abrasive tank. The blasting media is sucked at the bottom of the hopper to be injected into the tungsten carbide nozzle for blasting.

As with the P450, the compressor power needed for ideal operation is 5 horsepower.

Abrasive sold in 25kg bags

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.