The SF 1000 HD booths are high-flow blow molding machines including a booth and a dust collector

This results in an additional dust collector connected to the machine. This dust collector has a very high suction power and a centrifugal fan

. Regarding filtration, the 4 filter cartridges of the dust collector are responsible for sorting the dust and preserving the components of the machine.

The sequential automatic cleaning of the filter cartridges ensures continuous efficiency and performance over time.

(Price: contact us)

Our SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

The high-performance ventilation of this cabin allows all blown particles to be sucked in. The larger dust is collected directly in the collection bag at the back of the machine, while the finer dust is stopped by the filter cartridge.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

Our reference SF1250 HD designates a 1250mm x 1250mm blowing booth equipped with a DPE 750 dust collector.

This dust collector provides high-performance ventilation. Indeed, the dust collector integrates a high-flow centrifugal fan and 4 automatically unclogged filter cartridges.

This system makes it possible to have a perfectly dust-free blowing chamber and ensures efficient and homogeneous treatment.

(Price: contact us)

Including 1500 cab and DPE750 high-flow dust collector

Internal dimensions (mm) Width x Depth x Height: 1000 x 980 x 680

Curb weight: 350 kg

Maximum load: 250 kg

Ventilation rate: 15m³/minute

Filtration: 4 x 500 mm filter cartridges

(Price: contact us)

PLAQ005 wall pass membrane for bag cabins with vacuum projection system.

Diaphragm passes through PLAQ006 wall for pressure cabins.

The DS600 vacuum blast cabinets, are reserved for very small parts and is a space-saving machine.

Its vacuum system projects the abrasive thanks to a venturi effect created inside the tungsten carbide nozzle .

The cyclone at the back of the blast cabinet is used to sort out the dust to be evacuated and the abrasive grains that can be reused.

(Price: contact us)

The DS vacuum bag cabins use the same principle as all vacuum machines: a venturi system inside the tungsten carbide nozzle is used to project the abrasive onto the sandblasted workpiece.

The healthy abrasive is then separated from the dust in the cyclone at the back of the blast cabinet. The dust is collected in the collection bag and the abrasive is redirected to the nozzle.

(Price: contact us)

The additional 450 m3/h dust collector increases the air intake flow in the cabin. Ideal for managing sandblasting and/or blowing activities that generate a lot of dust.

The DPE 400 has 2 filter cartridges and 2 automatic cleaning modules, with discharge bottle and cleaning valve. Both sets work with a pneumatic system that is automatically operated by pressing the pedal of the machine. The dust is collected in a disposable plastic bag that can be changed intuitively.

DS type bag cabins are professional sandblasting machines operating with a vacuum system. That is, the abrasive is projected via a venturi effect created inside the tungsten carbide nozzle .

The cyclone at the rear of the PRO series machines allows the abrasive to be sorted. Dust is discharged into the dust bag at the back of the sandblaster while larger grains of abrasive are reused.

(Price: contact us)

The CHAR 3 reinforced loading carriage makes it easier to enter and exit the parts to be sanded.

It also allows loading by overhead crane while keeping the cabin optimally sealed.

Designed and manufactured in France

The loading trolley makes it easier to enter and exit the parts to be sanded. It also allows loading by overhead crane while keeping the cabin optimally sealed.

The DS1500 sandblasting machines are the largest machines in the PRO range.

The operating mode of these cabins is the same as for the other DS type machines: the abrasive is projected thanks to the venturi system of the tungsten carbide nozzle .

It is then separated from the dust; The dust is discharged into the recovery system integrated into the baghouse, and the pure abrasive is recycled and reinjected into the nozzle.

(Price: contact us)

The PS 700 blast cabinet combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone, these sandblasting machines can sort the abrasive in order to separate dust and healthy abrasive grains. These are then reprojected.

(Price: contact us)

The PS 1000 combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone at the rear of the machine, the PRO range allows the abrasive to be sorted. Dust is discharged into the dust bag at the back of the sandblaster while larger grains of abrasive are reused.

(Price: contact us)

The PS1500 works with an abrasive tank that is pressurized for blasting with 3 to 5 times higher yields compared to the vacuum system.

The recycling cyclone allows the separation of dust from the abrasive. The waste is then discharged into the dust collection bags and the recycled abrasive is resprayed.

(Price: contact us)

Foam gasket top of filter cartridge

The DF Expert Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

Option that allows you to process longer parts, such as extrusion screws, profiles or various tubes. This option will also allows parts to be moved through the cabinet without having to open the door.

Rectangular switch

Round switch diameter 22mm

For typical cabins: CMK, CMKO

Low valve gasket, ventilation module

The Expert DF Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

Designed and manufactured in France, the DF 1250 large-format industrial sandblasting cabinet is a high-performance sandblasting machine based on a vacuum/injector projection system (Venturi effect) that guarantees power, precision, and consistency.

Equipped with the innovative and compact ARENA BLAST triple module system, it ensures efficient suction, optimal abrasive recycling, and effective dust collection for a clean and safe working environment.

Robust, ergonomic, and easy to maintain, the DF 1250 is a long-term investment for companies looking to improve the quality of their surface treatment operations, increase productivity, and guarantee consistent and reliable sandblasting results.

Boron carbide gun and nozzle option compatible with vacuum machines.

Originally, machines with a vacuum spraying system are equipped with tungsten carbide nozzles; Thanks to this option, they will also be able to work with boron carbide nozzles, which are 2 times more resistant.

Foam gasket under ventilation motor

The Expert DF Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

Spring for door closure and/or pedal safety.

Compatible with all our sleeve cabins since 1995.

Electronic hour meter for EXPERT range or optional baghouses.