The 1515E bag cabinets are the largest blasting cabinets we offer in standard sizes. With their internal dimensions of 1.5x1.5x1 m, they make it possible to process large one-piece parts while maintaining the characteristics of our baghouses.

On this machine, the abrasive is projected thanks to its pressurized tank. The abrasive is sprayed and then recycled.

This machine from our EXPERT range, designed for intensive use, benefits from 2 cyclones at the rear of the cab, efficient ventilation, and a powerful engine.

Machine equipped with a reinforced loading trolley with turning table (CHAR3) and additionnal dust collector  (DPE 750)

(Price: contact us)

Assortment of 1/2 dosing washers for 2 and 3mm nozzles.

Polyurethane hose diameter 120 mm

The PF700 professional bag blasting cabinets combine performance with a small footprint.

They are recommended for parts that do not exceed 50cm and/or need to be difficult to pickle.

Pressure booths work with a simple principle; The abrasive tank is pressurized and the abrasive is projected through the boron carbide nozzle thanks to this principle.

At the back of the machine, two cyclones are responsible for sorting the abrasive and dust.

(Price: contact us)

Automatic sandblasting/microblasting cabinet with rotating basket dedicated to de-powdering and surface treatment for parts printed in 3D using SLS and MJF technologies.

This is the machine for post processing in additive manufacturing.

Assortment of 1/2 dosing washers for 4.5 and 6 mm nozzles.

The DPE 750 three-phase dust collector (N°5000) is in excellent condition, close to a new dust collector. Commissioned for the first time in 2006.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

Tungsten carbide microblasting nozzle Ø1.7 mm with venturi

The DPE 750 dust collector (N°5582) is in excellent condition, close to a new dust collector.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

9 mm thick adhesive foam washer

The PF 1000 Char 3 machine (N°5697) is in excellent condition close to a new cab. Commissioning in October 2023 with an operating time of approximately 300 hours.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

Mixing tube without cap.

The DC 1500 machine (No. 5610), first put into service in 2023, is in near-new condition.

The Arena team has completely reconditioned this second-hand machine and refurbished all the worn parts.

Contact us via the contact form to request a price quote or further information.

Available immediately!

The airbrushed sandblaster (N°5673) is in excellent condition, close to a new one.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

The DPE 750 dust collector (N°5345 manufactured in September 2021) is in excellent condition, close to a new dust collector.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

The PF 1000 Char 3 double-pot machine (N°5712, year of manufacture October 2023) is in excellent condition, close to a new cab.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

The DF 70 Sandblasting Cabinet (No. 3786), first commissioned in 2012, has been fully refurbished and retrofitted. It is once again operational for your intensive sandblasting operations for many years to come.

The Arena team has carried out a complete reconditioning of this second-hand machine and replaced all worn parts with new ones: gloves, filters, nozzles, piping, etc.

Contact us via the contact form for any pricing inquiries or additional information.

Immediate availability!

First commissioning in December 2023 for this PF 700 sandblasting cabinet (No. 5722).

The machine is in excellent condition, close to a new cab.

The Arena team has completely reconditioned this used machine.

Contact us via the contact form for any price request or additional information.

Immediate availability!

3/4 metering washers for 2 and 3mm nozzles.

Assortment of 3/4 metering washers for 4, 5 and 6 mm nozzles. For booster machines manufactured after 2019

Mounting spring for MO2 motor-fan (2 required).

Air hose diameter 8 x 15 mm, per metre

Black polyurethane hose Ø2.5/4

Price quantity per metre

Blue polyurethane hose Ø2.5/4

Price quantity per metre

Special support for rim processing in a blast cabinet

100% made in our workshop in the North of France

Removable holder ideal for processing cylindrical parts, e.g. filters, in blast or blow molding cabinets

The little sister of the more compact and accessible 3DX-PERT , the 3D-PRO bead blasting and dusting booth will be perfect for small series and prototypes.

The 3D PRO has been designed to process 3D printed parts by Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is reduced for a homogeneous surface finish. The removable turntable basket is designed for optimal part mixing and allows for automatic sanding and complete blowing while preserving their geometry.

The DC 1500 Sandblasting cabinet is suitable for larger workpieces.

The operating principle and handling remain the same as in the smaller cabinets: the sprayed abrasive is sucked up, sorted and then recycled.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The DC 600 sandblasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)