Our products

Mobile overpressure sandblasting machine allowing high-intensity sandblasting operations to be carried out. The 8 L pressure pot allows surface treatments 3 to 5 times faster than with a basic vacuum/suction system.

Design and manufacture 100% in our workshop in the North of France.  

(Price: contact us)

The P200C mobile sandblaster, or airbrush, is equipped with a tank carriage. The abrasive, stored in the carriage, is sucked in from the bottom of the carriage and is projected via the gun's tungsten carbide nozzle.

Like the P200 gun, the 5mm nozzle requires a 2.5 horsepower compressor for optimal operation.

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

>>> Additional time

The SF 1000 HD booths are high-flow blow molding machines including a booth and a dust collector

This results in an additional dust collector connected to the machine. This dust collector has a very high suction power and a centrifugal fan

. Regarding filtration, the 4 filter cartridges of the dust collector are responsible for sorting the dust and preserving the components of the machine.

The sequential automatic cleaning of the filter cartridges ensures continuous efficiency and performance over time.

(Price: contact us)

The DS600 vacuum blast cabinets, are reserved for very small parts and is a space-saving machine.

Its vacuum system projects the abrasive thanks to a venturi effect created inside the tungsten carbide nozzle .

The cyclone at the back of the blast cabinet is used to sort out the dust to be evacuated and the abrasive grains that can be reused.

(Price: contact us)

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø5 tungsten carbide sandblasting nozzle 

The DF Expert Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

The high-performance ventilation of this cabin allows all blown particles to be sucked in. The larger dust is collected directly in the collection bag at the back of the machine, while the finer dust is stopped by the filter cartridge.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

Arecognized specialist in the sandblasting bag booth for more than 40 years, ARENA has brought together the best of its technologies and the features of its machines to meet the growing need for post-3D printing processing in a single booth !

The 3DX-PERT has been designed to process 3D printed parts using Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is reduced for a homogeneous surface finish. The removable turntable basket is designed for optimal part mixing and allows for automatic sanding and complete blowing while preserving their geometry.

Benefit from a sliding scale rate for all orders over 100 kg*

➔ Contact us via the contact form

Available in different grain sizes and packaging, price excluding VAT

Manual turntable diameter 500 mm.

This removable tray is compatible with all our blast or blow molding bag booths.

It is used to facilitate the handling of heavy and/or bulky parts in the closed cab.

The DC 600 stick blasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)