Type II Plastic Media - ABP
€189.75
Tax excluded
Available for purchase in different grain sizes and packaging.
For any order over 100 kg*, you can benefit from a sliding scale rate.
➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.
*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.
>>> Additional time
General:
Plastic abrasive media is recommended for scrubbing work. Indeed, plastic guarantees impeccable cleaning thanks to its high-pressure projection but also guarantees not to deteriorate the initial surface.
A Type II plastic abrasive is less hard than Type III.
This media is made to be used in a sleeve booth and to be sprayed several times.
Available in packaging: 25 kg, 10 kg, 5 kg
Available in 4 grain sizes:
| ABP 20/30 | 0.600 to 0.840 mm |
| ABP 30/40 | 0.425 to 0.600 mm |
| ABP 40/60 | 0.240 to 0.425 mm |
| ABP 60/80 | 0.175 to 0.240 mm |
Description & Application
Type II plastic media is a urea-based thermoformed plastic media. It is manufactured according to the specifications of the "US MILITARY MIL-P-85891A" standard with regard to grain size, grain distribution, hardness.
Type II is the most widely used and versatile media for surface treatment. Its hardness is average in the panel of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.
It is intended for stripping/scrubbing delicate parts, removes the surface layer without attacking the substrate. Widely used in aeronautics.
Typical Chemical Analysis
| Composition | % Typical |
| Urea | 66-70% |
| Cellulose | 30-33% |
| Titanium Dioxide | |
| Iron Oxide | |
| Stearate de Zinc | |
| Sulphate de Barium | |
| Anti-static solution |
Typical Physical Properties
| Bulk density | 0.70 g/cc (depending on grade) |
| Shape | Semi cubic to angular |
| Colour | Multi colors or white-beige |
| Density | 1.4 - 1.6 g (depending on grade) |
| Hardness | 54-62 Barcol - 3.0-3.5 Mohs |
ABP 30/40
Data sheet
- Abrasive family
- Scrub
- Using the abrasive
- Recyclable abrasive (bag cabinets)
- Type of abrasive
- Plastic Media
Specific References
Available for purchase in different grain sizes and packaging.
For any order over 100 kg*, you can benefit from a sliding scale rate.
➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.
*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.