The PS 700 blast cabinet combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone, these sandblasting machines can sort the abrasive in order to separate dust and healthy abrasive grains. These are then reprojected.

(Price: contact us)

The PS 1000 combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone at the rear of the machine, the PRO range allows the abrasive to be sorted. Dust is discharged into the dust bag at the back of the sandblaster while larger grains of abrasive are reused.

(Price: contact us)

The PS1500 works with an abrasive tank that is pressurized for blasting with 3 to 5 times higher yields compared to the vacuum system.

The recycling cyclone allows the separation of dust from the abrasive. The waste is then discharged into the dust collection bags and the recycled abrasive is resprayed.

(Price: contact us)

The PF type sleeve cabins are definitely the most powerful cabins in our range; They combine the quality of the materials and the pressure system for great sandblasting power.

Recommended for tough processing or for greater productivity, they can be equipped with the double pot option for continuous blasting without the need to stop to fill the abrasive tank.

(Price: contact us)

The PF1250 professional blasting cabinets are "square" cabinets. Indeed, this model of machine is as wide as it is deep.

They allow the treatment of large parts in the sandblasting chamber and can strip any type of paint thanks to the overpressure spraying system.

The abrasive tank is pressurized and the abrasive is sent to the nozzle with the pressure build-up. This system allows for 3 times more efficiency than vacuum machines.

(Price: contact us)

The PF1500 blast cabinets make it possible to blast and strip larger parts.

The high-performance ventilation integrated into the cab and the two cyclones at the rear of the machine allow for a very good view of the blast chamber. They are also used to separate the healthy abrasive from the worn abrasive and dust to preserve the elements of the blasting machine.

The abrasive overpressure spraying system gets rid of the most stubborn paints.

(Price: contact us)

The 1515E bag cabinets are the largest blasting cabinets we offer in standard sizes. With their internal dimensions of 1.5x1.5x1 m, they make it possible to process large one-piece parts while maintaining the characteristics of our baghouses.

On this machine, the abrasive is projected thanks to its pressurized tank. The abrasive is sprayed and then recycled.

This machine from our EXPERT range, designed for intensive use, benefits from 2 cyclones at the rear of the cab, efficient ventilation, and a powerful engine.

Machine equipped with a reinforced loading trolley with turning table (CHAR3) and additionnal dust collector  (DPE 750)

(Price: contact us)

The PF700 professional bag blasting cabinets combine performance with a small footprint.

They are recommended for parts that do not exceed 50cm and/or need to be difficult to pickle.

Pressure booths work with a simple principle; The abrasive tank is pressurized and the abrasive is projected through the boron carbide nozzle thanks to this principle.

At the back of the machine, two cyclones are responsible for sorting the abrasive and dust.

(Price: contact us)

Boron carbide nozzle in its nozzle holder for pressure abrasive blasting system

CODES: BU 4 - BU 5 - BU 6 - BU 8 

Tungsten carbide nozzle in its nozzle holder for pressure abrasive blasting system

CODES: BT 2 - BT 3 - BT 4 - BT 4/10 - BT 5 - BT 6 - BT 8