The SF 1000 HD booths are high-flow blow molding machines including a booth and a dust collector

This results in an additional dust collector connected to the machine. This dust collector has a very high suction power and a centrifugal fan

. Regarding filtration, the 4 filter cartridges of the dust collector are responsible for sorting the dust and preserving the components of the machine.

The sequential automatic cleaning of the filter cartridges ensures continuous efficiency and performance over time.

(Price: contact us)

Our SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

The ARENA double sandblasting pressure pot allows for continuous high-pressure sandblasting without interruption.

Indeed, with traditional high-pressure sandblasting, you need to wait several seconds for the pot to refill with abrasive before resuming the sandblasting process.

SF dust collection machines offer a high dust extraction rate. The cabin is ventilated by a dust collector incorporating a centrifugal fan and 2 filter cartridges.

The high-performance ventilation of this cabin allows all blown particles to be sucked in. The larger dust is collected directly in the collection bag at the back of the machine, while the finer dust is stopped by the filter cartridge.

With the sequential automatic cleaning system, the efficiency of the dust collector is constant and the components of the machine are preserved.

(Price: contact us)

Our reference SF1250 HD designates a 1250mm x 1250mm blowing booth equipped with a DPE 750 dust collector.

This dust collector provides high-performance ventilation. Indeed, the dust collector integrates a high-flow centrifugal fan and 4 automatically unclogged filter cartridges.

This system makes it possible to have a perfectly dust-free blowing chamber and ensures efficient and homogeneous treatment.

(Price: contact us)

Including 1500 cab and DPE750 high-flow dust collector

Internal dimensions (mm) Width x Depth x Height: 1000 x 980 x 680

Curb weight: 350 kg

Maximum load: 250 kg

Ventilation rate: 15m³/minute

Filtration: 4 x 500 mm filter cartridges

(Price: contact us)

The additional 900 m3/h dust collector increases the air intake into the cab to optimum levels. It's an option that provides greater suction with a larger volume of air, to handle sanding and/or blowing activities that generate a lot of dust.

The DC 1500 Sandblasting cabinet is suitable for larger workpieces.

The operating principle and handling remain the same as in the smaller cabinets: the sprayed abrasive is sucked up, sorted and then recycled.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The additional 450 m3/h dust collector increases the air intake flow in the cabin. Ideal for managing sandblasting and/or blowing activities that generate a lot of dust.

The DPE 400 has 2 filter cartridges and 2 automatic cleaning modules, with discharge bottle and cleaning valve. Both sets work with a pneumatic system that is automatically operated by pressing the pedal of the machine. The dust is collected in a disposable plastic bag that can be changed intuitively.

The DC 600 sandblasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The CHAR 3 reinforced loading carriage makes it easier to enter and exit the parts to be sanded.

It also allows loading by overhead crane while keeping the cabin optimally sealed.

Designed and manufactured in France

The DC 700 handle blasting cabinet works very easily in a closed circuit.

The sprayed abrasive is vacuumed, sorted and then recycled. The dust is removed while the pure abrasive is recycled and reused for re-spraying.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

The loading trolley makes it easier to enter and exit the parts to be sanded. It also allows loading by overhead crane while keeping the cabin optimally sealed.

Special option for an industrial sandblasting or dust removal machine to be fitted and adapted by our design office to a hoop cabin for automatic sandblasting of parts on a motorized plate.

Option turntable integrated into the table diameter 800 mm.

This manual turntable is used to facilitate the handling of heavy or bulky parts inside the machine during sandblasting.

Manual turntable diameter 500 mm.

This removable tray is compatible with all our blast or blow molding bag booths.

It is used to facilitate the handling of heavy and/or bulky parts in the closed cab.

Option that allows you to process longer parts, such as extrusion screws, profiles or various tubes. This option will also allows parts to be moved through the cabinet without having to open the door.

Ionised air blowgun to discharge static electricity from the interior of the cab and improve dust evacuation.

Pistol support stem, adjustable on 3 axes.

It allows the nozzle to be fixed in order to manipulate the sandblasted part with both hands.

This option is particularly useful for certain applications.

Micro-sandblasting pencil option for bag booth.

This pencil with its 1.7 mm nozzle allows for precise sandblasting.

Electronic boards, glass engraving, small or fragile parts... This pencil allows you to sand without impacting too large an area of the room.

Boron carbide gun and nozzle option compatible with vacuum machines.

Originally, machines with a vacuum spraying system are equipped with tungsten carbide nozzles; Thanks to this option, they will also be able to work with boron carbide nozzles, which are 2 times more resistant.

Option for DPE 400 and DPE 750 dust collectors and our dust collection machines .

Custom paint option. Machine painted according to RAL of your choice for better integration into your premises.

Special support for rim processing in a blast cabinet

100% made in our workshop in the North of France

Immobilisation wheels for sandblasting or dust removal cabins 

Removable holder ideal for processing cylindrical parts, e.g. filters, in blast or blow molding cabinets

Rubber curtain for cabin interior - Dimensions 1500 x 700 - RIDO

It is used to protect the bottom of the handle cabin from abrasive splashes that could damage it.

This option is generally recommended for bag cabins with an overpressure projection system.

Under-door abrasive recovery gutter kit. The gutter is used to collect abrasive scraps when opening the door of our baghouses.

This helps to keep a workshop/work environment clean and dust-free on the floor.

Option for sandblasting cabinets range EXPERT and PRO 

Lockable cover with padlock to lock the pressure setting.