Our products

The DC 1000 Stick Blasting Booth has a very simple operation.

The sprayed abrasive is vacuumed, sorted and then recycled. The waste is discharged and the pure abrasive is recycled to be resprayed by the machine's tungsten carbide nozzle.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

ARENA Engraving Gun with 8mm Tungsten Carbide Nozzle

The Expert DF Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

The DS1500 sandblasting machines are the largest machines in the PRO range.

The operating mode of these cabins is the same as for the other DS type machines: the abrasive is projected thanks to the venturi system of the tungsten carbide nozzle .

It is then separated from the dust; The dust is discharged into the recovery system integrated into the baghouse, and the pure abrasive is recycled and reinjected into the nozzle.

(Price: contact us)

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

The Expert DF Series Bag Cabsare the most advanced vacuummachines   in our ranges.

The compact and high-performance ventilation system includes three modules to enable continuous dust removal and abrasive recycling, fine dust recovery and dust filtration.

This system offers greater working comfort for the user and preserves the components of the blasting cabinet.

(Price: contact us)

Archifine Sandblasting Sand N°4, the 25kg bag

Product unavailable; See the SCOREX SC250 article for equivalent abrasive.

Available for purchase in different packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

>>> ABB 60 BREAK

The DC 1500 blast stick cabinet is suitable for larger workpieces.

The operating principle and handling remain the same as in the smaller cabinets: the sprayed abrasive is sucked up, sorted and then recycled.

All our equipment is designed and manufactured entirely in France in our factory in Marquette Lez Lille (59).

(Price: contact us)

As a manufacturer, we can make the modifications that will best suit your application according to your wishes.

It may be interesting to provide an opening on the side opposite the cabin door, allowing a longer room to protrude, this opening being closed by a small hatch when not in use.

It is sometimes necessary to provide 2 openings facing each other in order to pass a profile through the machine, for example.

The PS 700 blast cabinet combines the small footprint advantage with the productivity of a pressure boosting machine. The overpressure blasting means that the abrasive tank is pressurized and offers a 3 to 5 times higher yield compared to the vacuum.

Equipped with a cyclone, these sandblasting machines can sort the abrasive in order to separate dust and healthy abrasive grains. These are then reprojected.

(Price: contact us)

Our reference SF1250 HD designates a 1250mm x 1250mm blowing booth equipped with a DPE 750 dust collector.

This dust collector provides high-performance ventilation. Indeed, the dust collector integrates a high-flow centrifugal fan and 4 automatically unclogged filter cartridges.

This system makes it possible to have a perfectly dust-free blowing chamber and ensures efficient and homogeneous treatment.

(Price: contact us)