Various mobile sandblasters and guns

Fabric sandblasting hood P300 2. The flexible plastic visor allows for good visibility and easy movement.

The hood protects the face when sanding/airbrushing outdoors with a mobile sandblaster and reduces the risk of dust inhalation.

For more advanced filtration and protection, please refer to C 1520 Ventilated Sandblasting Helmet.

Pressurized sandblasting machine valve to close the abrasive tank and increase its pressure.

Compatible with all our pressure machines (sleeve cabins and airgummers).

Pressure vessel bottom mixing tee.

Set of 5 glass screens for C1520 sandblasting helmet (205 x 155 mm)

Set of 5 glass screens for C1520 sandblasting helmet (235 x 220 mm)

Pressure vessel bottom mixing tee.

Leather/cotton sandblasting combination size XL + gloves.

This combination is used to protect the user during stripping, sanding, airbrushing work, outdoors using a mobile sandblaster.

Its alloy of 2 materials allows excellent protection while keeping good ventilation and correct handling.

-- Sandblasting helmet not included with the suit --

Rubber nose for A15C engraving gun.

It allows the machine to be pressed against the glass in order to sand the desired surface and recover the grains that can be reprojected.

Control for sandblaster NS8/40T, NS8T E, NS18.

The trigger is used to control the blasting, it is located at the end of the hose, before the nozzle, for an easy and intuitive grip.

Vacuum blasting gun handle.

It is used to manage the start and stop of the blast treatment and to control the direction of the abrasive jet.

Assortment of 1/2 dosing washers for 2 and 3mm nozzles.

Assortment of 1/2 dosing washers for 4.5 and 6 mm nozzles.

Ventilated sandblasting helmet + activated carbon filter.

This personal protective element is connected to a compressed air supply or directly to the fitting provided for this purpose on our ARENA sandblasters.

The C1520 helmet includes an air regulator and a safety device that beeps when the airflow drops below the critical airflow.

An activated carbon filter mounted on the regulator traps any solid particles and odors.

3/4 metering washers for 2 and 3mm nozzles.

Assortment of 3/4 metering washers for 4, 5 and 6 mm nozzles. For booster machines manufactured after 2019

The P800C mobile sandblaster or airgummer includes, in addition to the trigger gun with tungsten carbide nozzle Ø 8 mm, a carriage that serves as an abrasive tank. The grains are sucked up from the bottom of the hopper to sand.

Space-saving, this trolley will be perfect for any type of outdoor sandblasting.

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø5 tungsten carbide sandblasting nozzle 

The P200C mobile sandblaster, or airbrush, is equipped with a tank carriage. The abrasive, stored in the carriage, is sucked in from the bottom of the carriage and is projected via the gun's tungsten carbide nozzle.

Like the P200 gun, the 5mm nozzle requires a 2.5 horsepower compressor for optimal operation.

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø6 tungsten carbide sandblasting nozzle 

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø8 tungsten carbide sandblasting nozzle 

The P450 C mobile sandblaster has a mobile trolley that serves as an abrasive tank. The blasting media is sucked at the bottom of the hopper to be injected into the tungsten carbide nozzle for blasting.

As with the P450, the compressor power needed for ideal operation is 5 horsepower.

ARENA Engraving Gun with 8mm Tungsten Carbide Nozzle

Compressed air dryer for sandblasters

Max compressed air flow rate: 2000L/min (120m3/h)

9 mm thick adhesive foam washer