Round grit - Stainless steel microbeads
€350.50
Tax excluded
Available for purchase in different packaging.
For any order over 100 kg*, you can benefit from a sliding scale rate.
➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.
*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.
Steel microbeads (from 0.12 to 0.30 mm) are a spherical abrasive designed to make a finishing bead blasting. With this type of abrasive, the treatment of aluminum and stainless steel parts is recommended because it does not contain any trace of iron (and potentially rust).
Their high hardness makes it possible to sand at higher pressure than with glass microbeads, but their density generally requires a pressure spraying mechanism in order to obtain a conclusive result.
Stainless steel microbeads 0.120 to 0.300 mm
Available in packaging: 25 kg, 10 kg or 5 kg
ABI 70
Data sheet
- Abrasive family
- Spherical
- Using the abrasive
- Recyclable abrasive (bag cabinets)
- Type of abrasive
- Metal Microbead
Specific References
Available for purchase in different packaging.
For any order over 100 kg*, you can benefit from a sliding scale rate.
➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.
*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.