Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.

Type II is the most widely used and versatile media for surface treatment. It has an average hardness within the range of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.

Rugos 50/80 sandblast sand, 25kg bag.

Product unavailable, see article SC06 for equivalent abrasive.

"Archifine" sandblasting sand N°6, the 25 kg bag
Out of stock: see equivalent product Scorex SC06

Archifine Sandblasting Sand N°4, the 25kg bag

Product unavailable; See the SCOREX SC250 article for equivalent abrasive.

Soft blasting abrasive, ideal for open-air blasting to remove graffiti or stripping sensitive parts.

Bottle of brown corundum grade 220

CODE : BOC 1

A tough, angular, mineral blasting abrasive ideally suited to stripping metal parts. 

This very hard aluminum oxide can be blasted many times, and is widely recommended for use in bag blast cabinets.

White corundum is a high-purity, extremely hard aluminum oxide used as an angular abrasive. It is free of impurities and is suitable for applications where iron oxide is not present, as it is non-ferrous.

Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.

Type III is a melamine-based thermoformed plastic media. Melamine is the most aggressive and hardest of the thermoformed plastic media (6 times more aggressive than urea - type II).

It must therefore be chosen carefully to avoid damage to delicate materials. It can be used for surface treatment in both dry and wet environments.

High-quality martensitic angular steel shot for shot blasting and sand blasting.

Stainless steel shot is obtained through melting, crushing, and sieving of Cr stainless steel. The high chromium content provides excellent resistance to corrosion and use. It is an abrasive that offers great durability and recyclability due to its high resistance. Recommended for surface cleaning, removal of paints and coatings, and creating surface roughness for treatments that must be free of ferrous contamination. Ideal for the treatment of stainless steel, galvanized steel, and aluminum.

Angular abrasive made from recycled soda-lime-silica glass, which is ground and sieved to produce particles with angular edges. The particles have sharp edges, making them effective for polishing and cleaning.

Abrasive for free-blast sandblasting and stripping with mobile sandblasters 

Sandblasting abrasive for free-blast or airblast applications, ideal for cleaning and stripping metal and stone/concrete, removing scale, rust, old paint coats and various dry impurities.

Abrasive for free-blast blasting and soft stripping with mobile sandblasters or airbrushes.

Ideal for replacing SCOREX® SC250 (fine grid).

GARNET blasting abrasive, used for surface treatment operations by impact as well as for water jet cutting.

Abrasive for sandblasting, stripping or other impact surface treatments. This sandblasting abrasive is made from agricultural by-products such as walnut shells, pine nuts and fruit pits.