e-Shop

1/2" pressure regulator

1/4" 5/2 dispenser for cleaning control

1/4" 3/2 dispenser for cleaning control

10/20 Sandblasting Hose

10/80 W choke for fluorescent tube

13/25 hose for NS8/40T sandblaster

13/25 hose for ARENA NS8/40 sandblaster

Full fluorescent light panel

1" nut for nozzle clamping with overpressure spray.

Compatible with bag cabinets and free-jet sandblasters, this nut is used to hold the tungsten carbide or boron blast nozzle.

Distributor 3/8" 3/2

Black hose 5x8mm, per meter

ARENA Engraving Gun with 8mm Tungsten Carbide Nozzle

Under-door abrasive recovery gutter kit. The gutter is used to collect abrasive scraps when opening the door of our baghouses.

This helps to keep a workshop/work environment clean and dust-free on the floor.

Air hose diameter 8 x 15 mm, per metre

Available for purchase in different packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

Archifine Sandblasting Sand N°4, the 25kg bag

Product unavailable; See the SCOREX SC250 article for equivalent abrasive.

Metal Ring Bag Filter for POS and GOS Booths

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

Rubber blow gun with fluted tip for EXPERT range blasting machines and for ARENA blowing booths .

Boron carbide nozzle in its nozzle holder for pressure abrasive blasting system

CODES: BU 4 - BU 5 - BU 6 - BU 8 

Bottle of brown corundum grade 220

CODE : BOC 1

Available for purchase in different grain sizes and packaging.

For any order over 100 kg*, you can benefit from a sliding scale rate.

➔ Contact us via the contact section, by email at devis@arenablast.com or by phone at 03.20.31.02.57.

*Decreasing rate applicable for the purchase of more than 100 kg of the same reference.

Filter cartridge length 300mm

CA10 HEPA filter cartridge for bag cabins equipped with HEPA filtration option

Filter cartridge compatible only on DP750 dust collectors manufactured before 20/04/2021

Antistatic PTFE filter cartridge 500 mm – for DPE 750 / DPE 400 products after May 2021

Small filter cartridge H=80mm D=135mm

500 mm filter cartridge for blast cabinets of types: POS, PDS, GOL, GDL, PDK, GX, GDX,K, T, S, L

Activated carbon filter cartridge for sandblasting helmet C1520

Filter cartridge for the ECO, PRO, EXPERT, MICROBLASTING, EXPERT 3D series of sandblasting booths

Round quarter-turn bipolar switch

Perforated sheet metal grid for CD1000 cab (1000 x 870 mm)

Gas compass for old type of ARENA handle cabin door.

Perforated sheet metal grid for CDK and CDKO 1000 booths

(1000 x 870 mm)

Centrifugal fan 0.75 kW