3DX-PERT / Post-print processing additive manufacturing
Recognized specialist in the sandblasting cabinets for more than 40 years, ARENA has brought together the best of its technologies and the features of its machines to meet the growing need for post-3D printing processing in a single booth !
The 3DX-PERT has been designed to process 3D printed parts using Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is...
- Ultra Compact Cab: 1050 Width / 1500 Depth
- Ergonomic dual-zone workspace allowing, without additional manual operation, to sand and/or blow parts automatically or manually.
- Cab equipped with 3 sandblasting nozzles:
- -2 automatic boron carbide blasting nozzles
- -1 manual boron carbide blasting nozzle (foot pedal control)
- Cab equipped with 4 blowing nozzles :
- -3 automatic blowing nozzles (including an ionized air nozzle)
- -1 ionized air manual blowing nozzle (gun control)
- Three-module, compact, high-performance integrated ventilation :
- -Cyclone abrasive recycling: Dust removal and abrasive recycling
- - Cyclone dust separation: Recovery of coarse dust
- -Filter cartridge: Filtration of fine dust at 5 μm with an automatic pneumatic cleaning system
- Removable motorized turntable:
- -20 L usable volume
- -Curb weight 15 kg
- -PU coating
- Multiple settings :
- -PLC and HMI
- -Adjustment of nozzle positions with ball joints on a stem
- • Adjustment of the richness of the air/abrasive mixture
- -Adjustment of the airflow speed at the inlet of the cyclone for more accurate dust/abrasive sorting
- -Machine height adjustment (120mm max)
- Intuitive replacement of wear parts (gloves, windows, filters, nozzles, etc.)
- Machine on wheels for easy movement
- Reinforced cab with roll bars
.jpg)
Also discover our other sandblasting machines
Since 1979 all our cabins have been designed and manufactured in our workshop in the north of France.
For more information: contact us
3DX-PERT
Data sheet
- Cab width
- 1000 mm
- Cabin interior dimensions (mm)
- 1000 W x 900 D x 765 H
- Maximum load
- 500 kg
- Frequency of use
- Intensive
- Abrasive Processing
- With recycling system
- Abrasive Spraying
- Depression
- Cabin type
- Cab made of reinforced sheet metal with hoops and lifting rings
- Nozzle material
- Boron carbide (~750h of use)
- Yield / Blasting Speed
- 100% and autonomous
- Air/Abrasive Mix Adjustment
- Manual on cyclone
- Ventilation rate
- Broadband
- Suction turbine power
- 1500 W (210 m3/h)
- Number of ventilation modules
- 3
- Cyclone dust and abrasive separation modules
- Yes
- Cyclone Dust Separation Module
- Yes
- Filter cleaning
- Sequential pneumatic pressure adjustment
- Blower
- 4 blow guns: automatic, manual and ionized air
- Sleeves and gloves
- High-strength latex
- Anti-abrasion rubber curtains
- No
- Retention sieves for large impurities
- Inclusive
- Electrical power
- 1700 W
- Noise level (excluding sandblasting)
- 74 dB
- Curb weight
- 460 kg
- Place of manufacture
- 100% in our workshop in the North of France
Specific References
Recognized specialist in the sandblasting cabinets for more than 40 years, ARENA has brought together the best of its technologies and the features of its machines to meet the growing need for post-3D printing processing in a single booth !
The 3DX-PERT has been designed to process 3D printed parts using Multi Jet Fusion (MJF) or Selective Laser Sintering (SLS) additive manufacturing. The parts are powdered and their roughness is reduced for a homogeneous surface finish. The removable turntable basket is designed for optimal part mixing and allows for automatic sanding and complete blowing while preserving their geometry.