PS 1500 - Pressure Blasting Booth
The PS1500 works with an abrasive tank that is pressurized for blasting with 3 to 5 times higher yields compared to the vacuum system.
The recycling cyclone allows the separation of dust from the abrasive. The waste is then discharged into the dust collection bags and the recycled abrasive is resprayed.
(Price: contact us)
For more details on the PRO range, follow this link
Internal dimensions (mm) Width x Depth x Height: 1500 x 900 x 760
Sizes available in this range (Width in mm): 700, 1000
Applications: sandblasting, bead blasting, airbrushing, pickling, deburring, surface treatment, etc.
PS 1500
Data sheet
- Cab Range
- PRO (DS / PS)
- Cab width
- 1500 mm
- Maximum load
- 250 kg
- Frequency of use
- Supported
- Abrasive Processing
- With recycling system
- Abrasive Spraying
- Overpressure
- Cabin type
- Folded sheet metal cab
- Nozzle material
- Tungsten carbide (~300h of use)
- Yield / Blasting Speed
- 300-500%
- Air/Abrasive Mix Adjustment
- Per dosing washer
- Ventilation rate
- Broadband
- Suction turbine power
- 1500 W (210 m3/h)
- Number of ventilation modules
- 2
- Cyclone dust and abrasive separation modules
- Yes
- Cyclone Dust Separation Module
- No
- Filter cleaning
- Sequential Pneumatics
- Blower
- Manual
- Sleeves and gloves
- PVC Standard
- Anti-abrasion rubber curtains
- Optional
- Retention sieves for large impurities
- Inclusive
- Electrical power
- 1500 W
- Noise level (excluding sandblasting)
- 74 dB
- Curb weight
- 250 kg
Specific References
You might also like
The PS1500 works with an abrasive tank that is pressurized for blasting with 3 to 5 times higher yields compared to the vacuum system.
The recycling cyclone allows the separation of dust from the abrasive. The waste is then discharged into the dust collection bags and the recycled abrasive is resprayed.
(Price: contact us)