PF 1500
The PF1500 blast cabinets make it possible to blast and strip larger parts.
The high-performance ventilation integrated into the cab and the two cyclones at the rear of the machine allow for a very good view of the blast chamber. They are also used to separate the healthy abrasive from the worn abrasive and dust to preserve the elements of the blasting machine.
The abrasive overpressure spraying system gets rid of the most stubborn paints.
(Price: contact us)
For more details on the EXPERT range, follow this link
Internal dimensions (mm) Width x Depth x Height: 1500 x 1000 x 700
Available sizes in this range (Width in mm): 700, 1000, 1250, 1515
Applications: sandblasting, bead blasting, airbrushing, pickling, deburring, surface treatment, etc.
PF 1500
Data sheet
- Cab Range
- EXPERT (DF / PF)
- Cab width
- 1500 mm
- Cabin interior dimensions (mm)
- 1500 W x 995 D x 744 H
- Max size of workpieces that can be handled (mm)
- 1060 W x 780 D x 600 H
- Maximum load
- 500 kg
- Frequency of use
- Intensive
- Abrasive Processing
- With recycling system
- Abrasive Spraying
- Overpressure
- Cabin type
- Cab made of reinforced sheet metal with hoops and lifting rings
- Nozzle material
- Boron carbide (~750h of use)
- Yield / Blasting Speed
- 300-500%
- Air/Abrasive Mix Adjustment
- Per dosing washer
- Ventilation rate
- Broadband
- Suction turbine power
- 1500 W (210 m3/h)
- Number of ventilation modules
- 3
- Cyclone dust and abrasive separation modules
- Yes
- Cyclone Dust Separation Module
- Yes
- Filter cleaning
- Sequential pneumatic pressure adjustment
- Blower
- Foot control
- Sleeves and gloves
- High-strength latex
- Anti-abrasion rubber curtains
- Inclusive
- Retention sieves for large impurities
- Inclusive
- Electrical power
- 1600 W
- Noise level (excluding sandblasting)
- 74 dB
- Curb weight
- 395 kg
- Place of manufacture
- 100% in our workshop in the North of France
Specific References
You might also like
The PF1500 blast cabinets make it possible to blast and strip larger parts.
The high-performance ventilation integrated into the cab and the two cyclones at the rear of the machine allow for a very good view of the blast chamber. They are also used to separate the healthy abrasive from the worn abrasive and dust to preserve the elements of the blasting machine.
The abrasive overpressure spraying system gets rid of the most stubborn paints.
(Price: contact us)