Ceramic Microbeads - ARENA BLAST Abrasive
  • Ceramic Microbeads - ARENA BLAST Abrasive
  • ARENA ceramic microbead spherical abrasive
  • ARENA ceramic microbead spherical abrasive

Ceramic Microbeads

€72.25
Tax excluded

Ceramic microbeads are one of the best choices when it comes to bead blasting. They offer superior strength to glass microbeads and require reasonable projection power due to their lightness.

They are made of very resistant zirconia oxide and do not contain iron, which allows the processing of stainless steel and aluminum.

The ceramic microbead is a guarantee of durability and efficiency.

Packaging
Particle size
Quantity

Description and advantages of ceramic microbeads

Ceramic beads are one of the best choices for bead blasting. They are around ten times stronger than glass beads and will last longer. They are lighter than steel or stainless steel beads, but require less blasting power. It's a less expensive solution in the long term, more environmentally friendly because ceramic microbeads are recycled a greater number of times in an ARENA BLAST sandblasting cabinet, and provides impressive sandblasting or microblasting results in terms of the result and surface appearance obtained.

They are produced from highly resistant zirconium oxide and, above all, are iron-free, so they can be used to treat stainless steel and aluminium.

With ceramic microbeads, you're choosing a durable, effective solution that works perfectly in ARENA BLAST blasting equipment.

Characteristics of ceramic microbeads

Grain ShapeSpherical
ColourWhite
Hardness Mohs 7 - 7.5
Manufactured in France
Bulk Density± 3.8 kg/dm3
Real density ± 2.1-2.4 kg/dm3
Fusion point2 100 °C
NormsAMS 2431/7 ou NF L 06-824

Chemical composition

Zirconium oxide - ZrO2
60%
Silicon dioxide - SiO2
30%
Aluminium oxide - AI2O3
10%

Available granulométries

ARENA CODE FEPA F / MESHGRID SIZES
ABB 6060125 - 250 µm
ABB 12012063 - 125 µm
ABB 2052050 - 63 µm

If you have any queries or need advice, please do not hesitate to :

Here is a table summarising the differences between grades of ceramic microbeads

Features0 - 63 µm63 - 125 µm125 - 250 µm
SizeVery fine, for precise detailsMedium and versatileBigger, for greater impact
Typical applicationsDelicate finishes, sensitive surfacesStandard cleaning, matt finish on stainless steel or aluminiumStripping and finishing of surfaces requiring intense cleaning, most effective on thick paint rust
Impact forceLow, ideal for fragile materialsMedium will adapt easilyStrong, effective for resistant materials
Roughness obtainedLight and uniformMatt, uniform surface finishMore pronounced roughness
Consumption and costMore expensive, used in small quantitiesGood compromise between efficiency and precisionLess expensive, consumed more quickly

Applications and sectors of activities

  • Impact surface treatments
  • Surface cleaning: descaling, desanding, derusting
  • Satin finishing, polishing
  • Hammering
  • Shot peening
  • Grinding of chemical products
  • Deburring
  • Post 3D SLS or MJF printing treatment, de-soldering, surface finishing
  • Car industry
  • Aerospace
  • Medical
  • Metallurgy
  • 3D Printing post treatment
  • Food industry

Recycling

A fully integrated solution for recycling used surface treatment and microgrinding beads is offered by our supplier, in collaboration with a company specialising in the reprocessing of ceramic waste, in particular zircon-based ceramic beads.

Contact us for more information.

ABB 60

Data sheet

Abrasive family
Spherical
Using the abrasive
Recyclable abrasive (bag cabinets)
Type of abrasive
Ceramic microbead

Specific References

WARNING: Equipment, materials, and abrasives used for surface treatment can be hazardous if used carelessly. Many national regulations exist for materials and abrasives considered hazardous during or after use (waste management), such as free silica or carcinogenic or toxic substances. These regulations must therefore be complied with. It is important to ensure that adequate instructions are given and that all necessary precautions are taken.

The technical data presented here is for marketing purposes only and is not contractual. We reserve the right to modify these data if necessary. The safety information accompanying this product is available in the form of a Safety Data Sheet (SDS) available on request. All sales are made in strict accordance with our "General Terms and Conditions of Sale", available on our website by clicking on the following link, or a written sales agreement duly signed by us.

Other products in the same category