Micro blasting hose with pencil and nozzle

Mixing cap with adjustment tube for ARENA ECO and PRO range machines.

Pressure vessel bottom mixing tee.

Pressure vessel bottom mixing tee.

Mounting spring for MO2 motor-fan (2 required).

Fan motor for older models of ARENA BLAST blast cabinets (CMI, CD, S, L, K, X, C). 

This suction motor was fitted on older machines and on the ECO range before June 2023.

Screw-in pressure gauge 40 mm

18" male connection

Nozzle holder for free jet vacuum blast gun nozzles 

CODES: P15C 3 - P3C 4 - P6C 4

Nozzle holder for tungsten carbide diameter nozzle with abrasive feed hose for vacuum/suction system.

(IMPORTANT Supplied without nozzle!)

CODES: PP4/4 - PP 4 - PP 4 T3.30 - PN 4 - PN 4 T3.30 - CN 4 - CN 4 T3.30 - CN 4 A 

Nozzle holder with boron carbide nozzle for vacuum/suction sandblasting system.

CODES: PP 5E / PN 5E / CN 5E

Complete hose for NS8TE sandblaster

Perforated sheet metal grid for cabs 100 and 150 (1000 x 900 mm)

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø5 tungsten carbide sandblasting nozzle 

The P200C mobile sandblaster, or airbrush, is equipped with a tank carriage. The abrasive, stored in the carriage, is sucked in from the bottom of the carriage and is projected via the gun's tungsten carbide nozzle.

Like the P200 gun, the 5mm nozzle requires a 2.5 horsepower compressor for optimal operation.

Fabric sandblasting hood P300 2. The flexible plastic visor allows for good visibility and easy movement.

The hood protects the face when sanding/airbrushing outdoors with a mobile sandblaster and reduces the risk of dust inhalation.

For more advanced filtration and protection, please refer to C 1520 Ventilated Sandblasting Helmet.

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø6 tungsten carbide sandblasting nozzle 

The P450 C mobile sandblaster has a mobile trolley that serves as an abrasive tank. The blasting media is sucked at the bottom of the hopper to be injected into the tungsten carbide nozzle for blasting.

As with the P450, the compressor power needed for ideal operation is 5 horsepower.

The free jet sandblasting gun pack will give you access to all the necessary equipment (excluding compressor) for your airbrushing and simple sandblasting operations

Very easy to use and robust over time thanks to its Ø8 tungsten carbide sandblasting nozzle 

The P800C mobile sandblaster or airgummer includes, in addition to the trigger gun with tungsten carbide nozzle Ø 8 mm, a carriage that serves as an abrasive tank. The grains are sucked up from the bottom of the hopper to sand.

Space-saving, this trolley will be perfect for any type of outdoor sandblasting.

PLAQ005 wall pass membrane for bag cabins with vacuum projection system.

Diaphragm passes through PLAQ006 wall for pressure cabins.

Vacuum blasting gun handle.

Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.

Type II is the most widely used and versatile media for surface treatment. It has an average hardness within the range of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.

Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.

Type III is a melamine-based thermoformed plastic media. Melamine is the most aggressive and hardest of the thermoformed plastic media (6 times more aggressive than urea - type II).

It must therefore be chosen carefully to avoid damage to delicate materials. It can be used for surface treatment in both dry and wet environments.

Micro pneumatic dispenser

Micro pneumatic dispenser

Polyurethane Hose 2 x 3.2mm,le meter for micro-sandblasting machine PL17, PB60, CR17C, B17, DM600

Lighting window for old machines

Blasting hose ØInt=13 ØExt=25 for overpressure system supplied with coupling. Set does not include nozzle or nozzle holder.

CODES: S1325 1 / S1325 2 / S1325 3 / S1325 4 / S18 T3 / S18 T1

Flush Gauge D 50 mm