Plastic Media Type III
€189.75
Tax excluded
Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.
Type III is a melamine-based thermoformed plastic media. Melamine is the most aggressive and hardest of the thermoformed plastic media (6 times more aggressive than urea - type II).
It must therefore be chosen carefully to avoid damage to delicate materials. It can be used for surface treatment in both dry and wet environments.
Type III plastic abrasive is a scrubbing media, recommended for blasting in a bag booth. Type (III) refers to the hardness of the plastic.
A type III plastic abrasive will be harder than a type II plastic abrasive.
It is recommended for cleaning and scrubbing work. In a pressurized machine, it allows you to obtain a clean result without damaging the support.
In two grain sizes
| ABP 20/30 M | 0.600 to 0.840 mm |
| ABP 30/40 M | 0.425 to 0.600 mm |
ABP 30/40 M
Data sheet
- Abrasive family
- Scrub
- Using the abrasive
- Recyclable abrasive (bag cabinets)
- Type of abrasive
- Plastic Media
Specific References
Other products in the same category
Brown Corundum - ABC
€99.75
Glass bead
€87.50
Ceramic Microbeads
€72.25
Steel Shot
€93.75
Round Shot - Microbeads Steel
€151.25
Stainless Steel Shot
€280.00
Angular Glass
€43.75
Calcium silicate - SCOREX®
€16.75
Iron Silicate
€16.75
Aluminum Silicate
€16.75
Plastic Media Type II
€189.75
Bicarbonate de Sodium
€36.75
Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.
Type III is a melamine-based thermoformed plastic media. Melamine is the most aggressive and hardest of the thermoformed plastic media (6 times more aggressive than urea - type II).
It must therefore be chosen carefully to avoid damage to delicate materials. It can be used for surface treatment in both dry and wet environments.