Plastic Media Type II
€189.75
(€7.59 /kg)
Tax excluded
Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.
Type II is the most widely used and versatile media for surface treatment. It has an average hardness within the range of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.
General:
Plastic abrasive media is recommended for scrubbing work. Indeed, plastic guarantees impeccable cleaning thanks to its high-pressure projection but also guarantees not to deteriorate the initial surface.
A Type II plastic abrasive is less hard than Type III.
This media is made to be used in a sleeve booth and to be sprayed several times.
Available in 4 grain sizes:
| ABP 20/30 | 0.600 to 0.840 mm |
| ABP 30/40 | 0.425 to 0.600 mm |
| ABP 40/60 | 0.240 to 0.425 mm |
| ABP 60/80 | 0.175 to 0.240 mm |
Description & Application
Type II plastic media is a urea-based thermoformed plastic media. It is manufactured according to the specifications of the "US MILITARY MIL-P-85891A" standard with regard to grain size, grain distribution, hardness.
Type II is the most widely used and versatile media for surface treatment. Its hardness is average in the panel of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.
It is intended for stripping/scrubbing delicate parts, removes the surface layer without attacking the substrate. Widely used in aeronautics.
Typical Chemical Analysis
| Composition | % Typical |
| Urea | 66-70% |
| Cellulose | 30-33% |
| Titanium Dioxide | |
| Iron Oxide | |
| Stearate de Zinc | |
| Sulphate de Barium | |
| Anti-static solution |
Typical Physical Properties
| Bulk density | 0.70 g/cc (depending on grade) |
| Shape | Semi cubic to angular |
| Colour | Multi colors or white-beige |
| Density | 1.4 - 1.6 g (depending on grade) |
| Hardness | 54-62 Barcol - 3.0-3.5 Mohs |
*Discount applicable for purchases of more than 100 kg of the same reference.
ABP 30/40
Data sheet
- Abrasive family
- Scrub
- Using the abrasive
- Recyclable abrasive (bag cabinets)
- Type of abrasive
- Plastic Media
Specific References
WARNING: Equipment, materials, and abrasives used for surface treatment can be hazardous if used carelessly. Many national regulations exist for materials and abrasives considered hazardous during or after use (waste management), such as free silica or carcinogenic or toxic substances. These regulations must therefore be complied with. It is important to ensure that adequate instructions are given and that all necessary precautions are taken.
The technical data presented here is for marketing purposes only and is not contractual. We reserve the right to modify these data if necessary. The safety information accompanying this product is available in the form of a Safety Data Sheet (SDS) available on request. All sales are made in strict accordance with our "General Terms and Conditions of Sale", available on our website by clicking on the following link, or a written sales agreement duly signed by us.
Other products in the same category
Brown Corundum - ABC
€99.75
Glass bead
€87.50
Ceramic Microbeads
€72.25
Stainless Steel Shot
€280.00
Round Shot - Microbeads Steel
€151.25
Steel Shot
€93.75
Plastic Media Type III
€189.75
Almandine GARNET®
€29.75
Calcium silicate - SCOREX®
€16.75
Aluminum Silicate
€16.75
Iron Silicate
€16.75
Angular Glass
€43.75
Sodium bicarbonate
€36.75
Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.
Type II is the most widely used and versatile media for surface treatment. It has an average hardness within the range of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.