A tough, angular, mineral blasting abrasive ideally suited to stripping metal parts. 

This very hard aluminum oxide can be blasted many times, and is widely recommended for use in bag blast cabinets.

Blasting hose ØInt=13 ØExt=25 for overpressure system supplied with coupling. Set does not include nozzle or nozzle holder.

CODES: S1325 1 / S1325 2 / S1325 3 / S1325 4 / S18 T3 / S18 T1

White corundum is a high-purity, extremely hard aluminum oxide used as an angular abrasive. It is free of impurities and is suitable for applications where iron oxide is not present, as it is non-ferrous.

Glass microbeads are a precision blasting media for damage-free cleaning, maintaining tolerances, and are also suitable for deburring and satin finishing applications on metal parts made of aluminum, brass, or stainless steel. Their chemical inertness (insolubility in water or oil) ensures no contamination of the treated parts.

High-quality, durable silico-sodo-calcium glass microbeads (free of free silica) are manufactured from recycled glass in France.

Ceramic microbeads are one of the best choices when it comes to bead blasting. They offer superior strength to glass microbeads and require reasonable projection power due to their lightness.

They are made of very resistant zirconia oxide and do not contain iron, which allows the processing of stainless steel and aluminum.

The ceramic microbead is a guarantee of durability and efficiency.

Round stainless steel shot is produced by atomizing Cr Ni Stainless Steel. After various phases to obtain round pellets, precise sieving is carried out.

Its austenitic microstructure offers great durability, making it ideal for surface preparation and finishing. Its stainless properties make this product the perfect option for cases where ferrous contamination must be avoided.

Suitable for pressurized air and turbine blasting processes. It allows for better corrosion resistance and clean, bright finishes. The chemical composition of this round shot corresponds to austenitic stainless steel, which is a class of stainless steel commonly used due to its corrosion resistance and good formability.

Complete hose for NS8TE sandblaster

Stainless steel shot is obtained through melting, crushing, and sieving of Cr stainless steel. The high chromium content provides excellent resistance to corrosion and use. It is an abrasive that offers great durability and recyclability due to its high resistance. Recommended for surface cleaning, removal of paints and coatings, and creating surface roughness for treatments that must be free of ferrous contamination. Ideal for the treatment of stainless steel, galvanized steel, and aluminum.

The technology used for the production of high-carbon steel shot is the most advanced in the world. We offers shot that meets international SAE standards.

This results in a very high-quality martensitic angular shot. Continuous quality control, combined with cutting-edge production processes, optimizes the shot's lifespan and cleaning efficiency.

Compressed air hose diameter 13 mm lg 5m with express fittings

High-quality martensitic angular steel shot for shot blasting and sand blasting.

Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.

Type II is the most widely used and versatile media for surface treatment. It has an average hardness within the range of thermoformed plastic media. It can be used for surface treatment in dry or wet environments.

Micro blasting hose with pencil and nozzle

Abrasive hose diameter 10 x 17 mm, per metre

Sandblasting abrasive used for overpressure gumming in sandblasting cabinets.

Type III is a melamine-based thermoformed plastic media. Melamine is the most aggressive and hardest of the thermoformed plastic media (6 times more aggressive than urea - type II).

It must therefore be chosen carefully to avoid damage to delicate materials. It can be used for surface treatment in both dry and wet environments.

Air hose inner diameter 13 mm, per meter

GARNET blasting abrasive, used for surface treatment operations by impact as well as for water jet cutting.

Air hose diameter 8 x 15 mm, per metre

Abrasive for free-blast sandblasting and stripping with mobile sandblasters 

10/20 Sandblasting Hose

Abrasive for free-blast blasting and soft stripping with mobile sandblasters or airbrushes.

Ideal for replacing SCOREX® SC250 (fine grid).

Polyurethane Hose 2 x 3.2mm,le meter for micro-sandblasting machine PL17, PB60, CR17C, B17, DM600

Sandblasting abrasive for free-blast or airblast applications, ideal for cleaning and stripping metal and stone/concrete, removing scale, rust, old paint coats and various dry impurities.

Black polyurethane hose Ø2.5/4

Price quantity per metre

Angular abrasive made from recycled soda-lime-silica glass, which is ground and sieved to produce particles with angular edges. The particles have sharp edges, making them effective for polishing and cleaning.

Soft blasting abrasive, ideal for open-air blasting to remove graffiti or stripping sensitive parts.

Sandblasting hose 13 x 25 mm, per metre

Polyurethane hose diameter 60 mm, per metre

Abrasive for sandblasting, stripping or other impact surface treatments. This sandblasting abrasive is made from agricultural by-products such as walnut shells, pine nuts and fruit pits.

Archifine Sandblasting Sand N°4, the 25kg bag

Product unavailable; See the SCOREX SC250 article for equivalent abrasive.