Low valve gasket, ventilation module

Plexiglass safety screen 53 x 22 cm.

To be combined with the windows ref: VI 2.

WARNING: This screen is to be placed on the outside.

Perforated sheet metal grid 100 x 100 cm for baghouse width 1000

Leather/cotton sandblasting combination size XL + gloves.

This combination is used to protect the user during stripping, sanding, airbrushing work, outdoors using a mobile sandblaster.

Its alloy of 2 materials allows excellent protection while keeping good ventilation and correct handling.

-- Sandblasting helmet not included with the suit --

Window Surround Trim
the play (1.5m)

Activated carbon filter cartridge for sandblasting helmet C1520

Foam gasket under ventilation motor

Circular sieve for cabins type DF, DV, PF,  PV, PS.

This sieve allows the impurities to be recovered; It is placed at the inlet of the abrasive tank.

It protects the entire cabin and the abrasive from the pollution generated by the treated part.

Front door top seal

Nozzle holder for tungsten carbide diameter nozzle with abrasive feed hose for vacuum/suction system.

(IMPORTANT Supplied without nozzle!)

CODES: PP4/4 - PP 4 - PP 4 T3.30 - PN 4 - PN 4 T3.30 - CN 4 - CN 4 T3.30 - CN 4 A 

Spring for door closure and/or pedal safety.

Compatible with all our sleeve cabins since 1995.

Rubber seal U-profile

Spring for pedal restraint.

WARNING: compatibility to be checked in the description (no longer in the page).

Pedal chain, by the meter.

Door safety kit for all ARENA cabins except PF, DF and PV types.

Sandblasting hose 13 x 25 mm, per metre

Door safety kit for PF, PV and PS-type cabins.

Assortment of 1/2 dosing washers for 2 and 3mm nozzles.

Boron carbide nozzle in its nozzle holder for pressure abrasive blasting system

CODES: BU 4 - BU 5 - BU 6 - BU 8 

ARENA Handle Cab Door Handle.

Black rubber blowgun Ø8 mm

Rubber nose for A15C engraving gun.

It allows the machine to be pressed against the glass in order to sand the desired surface and recover the grains that can be reprojected.

Control for sandblaster NS8/40T, NS8T E, NS18.

The trigger is used to control the blasting, it is located at the end of the hose, before the nozzle, for an easy and intuitive grip.

Vacuum blasting gun handle.

Polyurethane hose diameter 120 mm

Assortment of 1/2 dosing washers for 4.5 and 6 mm nozzles.

Door lock part for all our handle cabins equipped with this system.

9 mm thick adhesive foam washer

Tungsten carbide microblasting nozzle Ø1.7 mm with venturi

Nozzle for vacuum blast cabinets and free-blast guns with vacuum blasting system. 

CODES: PP2/4 - PP2 - CMI 2A - CMI 2