Injector sandblaster with hopper
The P450 C mobile sandblaster has a mobile trolley that serves as an abrasive tank. The blasting media is sucked at the bottom of the hopper to be injected into the tungsten carbide nozzle for blasting.
As with the P450, the compressor power needed for ideal operation is 5 horsepower.
The 100% French quality sandblaster
This sandblaster, made in France, will enable you to carry out free jet sandblasting operations thanks to this sandblasting gun connected to a hopper containing the abrasive.
- The sandblasting gun projects abrasive by Venturi effect (injector system) onto the surface to be stripped. All you have to do is load one or 2 bags of abrasive (50 kg capacity) and connect the air inlet of the sandblasting machine to the compressor.
- The system is very easy to use, with a pressure gauge for adjusting the pressure, and is ideal for basic outdoor sandblasting and airbrushing applications.
- Replacing the tungsten carbide sandblasting nozzle (+300-hour service life) is intuitive and requires no special tools.
Nomenclature of the ARENA BLAST sandblaster
Nozzle holder (Ø5: P15C 3 - Ø6: P3C 4 - Ø8: P6C 4)
and its tungsten carbide sandblasting nozzle (Ø5 : PP2 - Ø6 : CMI 2A - Ø8 : CMI 2)
Sandblasting gun
Ø8 air inlet for express fitting (P150 6)
Abrasive feed hose
Ø10x17, length 2.90m (TUY)
Pressure regulator (Ø12/17 mm)
with analogue pressure gauge adjustable from 0 to 8 bar and self-draining settling filter
Air inlet with express connector (supplied with an additional connector for the compressed air inlet hose)
1. Nozzle holder (Ø5: P15C 3 - Ø6: P3C 4 - Ø8: P6C 4)
and its tungsten carbide blasting nozzle (Ø5 : PP2 - Ø6 : CMI 2A - Ø8 : CMI 2)
2. Sandblasting gun
Ø8 air inlet for express connection (P150 6)
3. Abrasive feed hose
Ø10x17, length 2.90m (TUY)
4. Pressure regulator (Ø12/17 mm)
with analogue pressure gauge adjustable between 0 and 8 bar and self-purging settling filter
5. Air inlet with express connector (supplied with an additional connector for the compressed air inlet hose)
Choose your blasting nozzle according to your compressor *.
Air consumption (for P=6 bar)
Ø5 nozzle
12 m3/h
Ø6 nozzle
27 m3/h
Ø8 nozzle
48 m3/h
Puissance recommandée du compresseur
Ø5 nozzle
3 cv / 2,2 kW
Ø6 nozzle
10 cv / 7,5 kW
Ø8 nozzle
15 cv / 11 kW
*Excluding cumulative consumption of other machines connected to your compressed air network. To guarantee optimum machine performance, you must ensure that the correct pipe diameters are used throughout your installation.
Sandblaster accessories (not included)
Compressor
Essential for compressed air supply
We are not a compressor manufacturer, but we do have distribution agreements. Please contact us for more information.
Compressed air dryer
This condenses the moisture present in the compressed air supplied by the compressor and eliminates it in order to supply the sandblaster with dry air.
Ventilated blasting helmet with activated carbon filter
Provides greater protection and comfort for the operator during sandblasting operations
P450C
Data sheet
- Nozzle material
- Tungsten carbide (~300h of use)
- Place of manufacture
- 100% in our workshop in the North of France
Specific References
The P450 C mobile sandblaster has a mobile trolley that serves as an abrasive tank. The blasting media is sucked at the bottom of the hopper to be injected into the tungsten carbide nozzle for blasting.
As with the P450, the compressor power needed for ideal operation is 5 horsepower.